List

AGRO POWER BKR

Optibelt

Profile: 3V/9J; 5V/15J; 8V/25J; SPB; SPC; A/HA; B/HB; C/HC; D/HD

The optibelt AGRO POWER kraftbands consist of wrapped V-belts which are connected via an abrasion-proof cover plate.

Preferably, this compact drive element is used when it comes to extreme loads, high axial distances, vertical shafts and coupling drives.

The abrasion-proof cover fabric, the high-quality rubber component and the special low-stretch tension cord allow for high dynamic loads and low-maintenance drives.

KB BLUE POWER

Optibelt

Profile: SPB, SPC, 5V/15J and 8V/25J

The new, wrapped high-performance wedge belt optibelt BLUE POWER has a high-strength aramid cord and as an individual belt, as a set or as a Kraftband is particularly suited for large, very heavily loaded drives.

The capacity of an Optibelt BLUE POWER wedge belt is about twice that of a wedge belt with standard technical design. This corresponds to additional performance of up to 100%.

KB RED POWER 3

Optibelt

Profile: 3V/9J, 5V/15J, 8V/25J, SPB, SPC

optibelt KB RED POWER 3 kraftbands are made up of wrapped optibelt RED POWER 3 V-belts which are joined by highly wear-resistant top cover. This compact drive product is preferably used when dealing with extreme shock loads, large centre distances and vertical shafts.

The cover fabric which is wear- and tear-resistant, the high-quality rubber compound and the special low-stretch polyester cord guarantee a high level of dynamic load and maintenance-free drives.

Combinations of sets are required in the event of multiple kraftbands being used per drive.

KB SK

Optibelt

Profile: 3V/9J, 5V/15J, 8V/25J, SPZ, SPA, SPB, SPC

Optibelt KB SK kraftbands consist of high-quality individual V-belts which are connected with one another by a joining band. According to the application, up to 5 wedge V-belts may be used per kraftband.

In special cases, kraftbands with more than 5 belts are available. When using several kraftbands per drive, combinations of sets must be specified.

Optibelt KB SK kraftbands are used above all with extreme shock loads or large centre distances in combination with small diameter pulleys and with vertical shafts.

KB VB

Optibelt

Profile: A/HA, B/HB, C/HC, D/HD

optibelt KB VB kraftbands consist of high-quality individual V-belts which are connected with one another by a joining band. According to the application, up to 5 classical V-belts may be used per kraftband. In special cases, kraftbands with more than 5 belts are available. When using several kraftbands per drive, combinations of sets must be specified.

optibelt KB VB kraftbands are used above all with extreme shock loads or large centre distances in combination with small diameter pulleys and with vertical shafts.

SUPER KBX-POWER

Optibelt

Profile: 3VX/9JX, 5VX/15JX

optibelt Super KBX-POWER kraftbands are made up of optibelt Super X-POWER V-belts and are joined together with a top surface which is highly resistant to wear and tear. optibelt Super KBX-POWER kraftbands display a tension behaviour which is clearly more favourable in comparison with conventional raw edge kraftbands. These kraftbands are used with up to five ribs or as a combination of sets.

optibelt Super KBX-POWER kraftbands are recommended to be used when dealing with extreme impact loads, vertical running shafts, large centre distances and many other special tasks in the field of machine and vehicle construction. The performance values correspond to the sections of the optibelt Super X-POWER V-belts.